Asphalt Milling Services in North & South Carolina
Cost-Effective Asphalt Milling for Parking Lots and Roadways Across North & South Carolina
From combating Carolina’s fluctuating weather to handling constant foot and vehicle traffic, your pavement can experience a lot of wear and tear. However, completely repaving your asphalt isn’t always the best solution.
Carolina Asphalt’s asphalt milling services offer a sustainable solution to restore your pavement without breaking the bank.
Our experienced asphalt contractors utilize state-of-the-art milling machines to remove the top layer of your asphalt, while keeping the base layer intact. We then install and compact new asphalt on top of the base layer, giving your pavement new life. Whether you live in Charlotte, Raleigh, Salisbury, Columbia, or Rock Hill, we can help get the job done.
What is Asphalt Milling?
Asphalt milling involves removing and grinding the top layer of your paved surface. This results in a smooth, clean surface for resurfacing, eliminating the need for costly complete full-depth removal and repaving.
Ready to Restore Your Pavement?
Benefits of Asphalt Milling for Commercial Properties in NC & SC
- Cost-Effective: Milling reduces the amount of materials, transportation, and heavy equipment needed, resulting in a much cheaper project than full reconstruction.
- Minimal Disruption: Asphalt milling only removes the top material layer, so it takes far less time than full-depth removal and repaving. This allows you to continue running your business with minimal downtime.
- Eco-Friendly & Sustainable: Part of the milling process is recycling damaged material, eliminating the need for additional materials, and reducing waste.
- Improved Drainage: Our milling machines also remove pavement imperfections by grinding the worn-down asphalt layer, allowing improved water drainage.
- Fast Turnaround: While full reconstruction can take days to weeks, milling only needs to remove the top layer of asphalt for repair, allowing for a much quicker project completion.
Our Expert Asphalt Milling Process
1. Site Assessment & Planning
We prep before the work begins. This includes clear surface marking and traffic control measures to ensure a safe work site. Our equipment and machines also undergo in-depth inspections to ensure they are secure and functioning correctly.
2. Positioning the Asphalt Milling Machine & Adjusting Depth
Our contractors will strategically position our milling machines along our markings, allowing for the pavement removal to be done precisely and safely. From there, we adjust the milling depth to target only your top layer, preserving the integrity of the base layer beneath.
3. Surface Milling
Our milling machines cut into, rotate, and grind up the surface layer until it is entirely removed, leaving behind a smooth, clean surface for future resurfacing.
3. Surface Milling
Our milling machines cut into, rotate, and grind up the surface layer until it is entirely removed, leaving behind a smooth, clean surface for future resurfacing.
4. Milling Collection
The removed asphalt millings are collected and brought to an asphalt plant to be recycled into brand-new asphalt mixes. Once the grinding and collecting have finished, our team will transport the milled material or properly dispose of it, leaving the worksite spotless for resurfacing.
Asphalt Milling vs. Full-Depth Reclamation: Which One Is Right For You?
Signs That Asphalt Milling is Needed
In some circumstances, pavement damage may appear more extensive than it is.
Full-depth reclamation isn’t necessary when the damage is only surface deep, as asphalt milling adequately addresses minor damage. If you notice the following signs, asphalt milling is likely the right choice for you.
- Surface-level cracks and wear
- Uneven pavement or safety hazards
- Standing water due to poor drainage
When Full-Depth Reclamation is the Right Choice
When damage goes beyond a few surface cracks or uneven sections, you’ll need full-depth reclamation. This process involves removing the entire structure of your asphalt pavement, including the top and base materials, pulverizing and mixing them to create a brand new surface layer.
If you notice these common signs, full-depth reclamation can be an ideal solution:
- Subgrade failure is causing major structural issues
- Deep potholes and widespread cracking
- Need for long-term, durable pavement solutions
Need Asphalt Milling in Charlotte, Columbia, or Anywhere in the Carolinas?
Are you tired of cracks and uneven surfaces on your asphalt pavement? Carolina Asphalt’s state-of-the-art milling machines safely and efficiently remove your damaged top layer, leaving your base in excellent condition for resurfacing.
As a fully dedicated North and South Carolina paving company, our experts are ready to assist property owners in towns like Monroe, Greensboro, Winston-Salem, Spartanburg, Greenville, Charleston, and beyond. Our services are performed in accordance with all local and regional regulations, ensuring the highest quality and peace of mind.
Our array of paving services has helped provide quality pavement to various industries, including health and education facilities, hotels, and HOAs. Each job we take on is executed with precision and customer focus, allowing us to provide results that exceed expectations each time.
You don’t have to look too far for cost-effective, eco-friendly, and reliable paving solutions to find the perfect company. Call Carolina Asphalt today or go online to get your free quote on our asphalt milling services.
Our Service Areas
We serve clients throughout North Carolina and South Carolina. Wherever you are, we’ll come to you. We’ll meet your needs right the first time. Carolina Asphalt is the trusted name for reliable maintenance, repair, and installation services near you.
North and South Carolina’s Premier Asphalt and Concrete Provider
- Charlotte
622 E Westinghouse Blvd.
Charlotte, NC 28273
Have a job outside of our service area? Our partners are here to help.
